Chemitek Antistatic Solar Armor 2.0 (ASA 2.0) is a next-generation antistatic and hydrophobic protective coating developed to extend solar panel cleanliness and efficiency.
Using advanced nanotechnology, ASA 2.0 forms a transparent molecular layer that repels dust, pollen, salt and moisture while reducing the need for frequent washing.
It is fully biodegradable, non-abrasive, and safe for all module surfaces, including anti-reflective coatings.
£404.55 +VAT
ASA 2.0 is a professional solar panel protection coating developed to reduce dust adhesion, water spotting, and organic buildup on photovoltaic (PV) modules.
The product forms an invisible antistatic and hydrophobic layer on the glass surface, helping panels stay cleaner for longer while maintaining maximum energy output.
It is a biodegradable, non-abrasive, and TÜV-tested formulation, approved for safe use on solar glass, frames, and coatings. When applied after cleaning with Solar Wash Protect (SWP) or Lichen Removal Agent (LRA), ASA 2.0 enhances long-term performance and reduces future cleaning frequency by up to 50%.
Repels dust and dirt buildup
Prevents water spotting and streaks
Reduces future soiling and cleaning frequency
Maintains panel efficiency and surface clarity
Anti Static Guard 2.0 is a biodegradable product designed to be as delicate as possible with the components of the solar module (ARC, silicone and aluminium frame).
Chemitek Antistatic Solar Armor (ASA 2.0) should be diluted with pure or demineralised water before application.
The ideal dilution depends on the type of cleaning system used and the desired protective performance.
Always apply ASA 2.0 after panels have been cleaned and rinsed, ensuring the surface is cool, dry, and residue-free.
ecommended for small or localised installations. Apply evenly on clean, dry panels using a hand or pump sprayer. Provides strong antistatic protection and excellent water repellency.
Suitable for large-scale sites using robotic or automated application systems. Ensures uniform coating and reduced consumption while maintaining effective dust and dirt repellence.
For aerial or light-coverage use where a thin, even layer is required. Provides lasting protection while minimising water use and drying time.
Always apply after cleaning with SWP or LRA for optimal adhesion.
Do not rinse after applying ASA 2.0 — let the coating air-dry naturally.
Avoid direct sunlight or hot panel surfaces during application.
Shake or stir the diluted mixture before use to maintain even distribution.
Reapply every 4–6 months depending on site exposure and environmental conditions.
The product should always be applied to clean, dry solar panels after all soiling and residues have been removed.
Do not apply in direct sunlight or on hot glass surfaces.
No rinsing is required after application — allow the coating to air-dry naturally.
For smaller rooftop systems or individual arrays, dilute ASA 2.0 according to your setup (typically 1:25 to 1:50) and apply evenly using a sprayer or fine mist applicator.
Ensure panels are fully clean using SWP or LRA before starting.
Spray evenly across each dry panel, covering the entire glass surface.
Use a soft microfiber cloth or brush if needed to spread the coating uniformly.
Do not rinse — let the coating dry completely before the panels are re-energised.
This method provides a high level of protection for smaller installations while keeping water use minimal.
For large-scale sites or commercial solar farms, ASA 2.0 can be applied through robotic sprayers, automated systems, or drone application.
Dilute between 1:50 and 1:75, depending on required coverage and environmental conditions.
Apply a fine, even layer over clean, dry panels immediately after cleaning.
Avoid overlapping or excessive spraying — a thin, consistent film is most effective.
Allow to air-dry naturally; no rinsing required.
This method delivers efficient, large-area protection with reduced product consumption and faster drying.
Chemitek is a global leader in the development of innovative solar panel cleaning and maintenance chemicals. Their range is designed to maximise PV system performance while protecting the environment. All products are biodegradable, TÜV-tested, and approved by major solar module manufacturers.
Unlike general-purpose cleaners, Chemitek products are specifically formulated for photovoltaic (PV) glass. They remove soiling effectively without damaging anti-reflective coatings, seals, or frames. Each product targets a specific issue — such as organic soiling, lichen growth, or static dust — and has been tested for compatibility and warranty safety.
Yes. Every Chemitek solution is biodegradable, pH-neutral, and non-toxic, designed for use in sensitive environments including floating PV systems and agricultural installations. Wastewater management guidelines are provided to ensure compliance with local regulations.
SWP is a 2-in-1 cleaner and antistatic protectant for regular maintenance of solar panels, removing dirt, pollen, and organic residue.
LRA, on the other hand, is a specialised treatment for stubborn biological growths such as lichen, moss, and algae. It’s ideal for panels in damp or shaded UK and Irish environments.
Yes. Chemitek holds letters of conformity from leading module manufacturers confirming that its products are warranty-safe when used according to the official instructions. They have been independently tested by TÜV SÜD to ensure full compatibility with solar glass and frames.
Cleaning frequency depends on the local environment. In the UK and Ireland, panels typically benefit from 1–2 cleanings per year using SWP, with additional LRA treatment as needed in high-lichen or coastal areas. ASA 2.0 can extend the interval between cleanings by up to 50%.
Yes — positively. By removing soiling and preventing recontamination, Chemitek products help recover lost yield caused by dirt and biological buildup. Field results show 3–5% performance improvements after cleaning with SWP or LRA, and longer-lasting cleanliness when ASA 2.0 is applied.
Chemitek’s full range — including SWP, LRA, ASA 2.0, and other cleaning agents — is available through their official UK & Ireland distributor, Solar Clean Robotics UK.
Here you can download product manuals and other documents
SKU: CHEMITEK-ASA-2KG
SKU: CHEMITEK-CRA-2KG
SKU: CHEMITEK-LRA-5KG
SKU: CHEMITEK-SWP-5KG
SKU: CHEMITEK-MRA-2KG
